Bearing installation, according to their type and size, choose mechanical, heat or hydraulic methods such. But in any case, are not directly tap the tapered roller bearing ring, cage, rolling elements or seals. When the force applied by the installation of FAG Bearings, must not be passed from one through the rolling bearing ring to the other ring, or it may be caused by damage to the raceway.

First of all: The first point is the tank equipment two, one with a prepared, periodically switching, reserve tank cleaning, oil temperature precipitation, absolutes watershed.

Second, the fuel tank should be set back to the oil zone degassing plates - reducing fuel impact; magnetic grid system - back to the oil adsorption zone ferroic machine hybrid; floating suction port - the level below the suction position; automatic drainage or flooding alarm device - will precipitate discharged water is separated in time; dynamic level control - a lot of sudden oil leakage alarm or interlock.

Third, the high oil filtration precision, generally require filtration accuracy of 10 ~ 20μm in order to ensure the cleanliness of the oil.

Fourth, to maintain a constant oil pressure lubrication system pressure control device to have high sensitivity and accuracy, to avoid pressure changes, resulting in operating pressure drop, resulting in insufficient local oil lubrication system, the occurrence of wear and sintering film FAG Bearings.

Fifth, the tank volume should be 35 to 40 times per minute displacement pump, some even more. At high oil level, ensuring that the oil in the tank long enough residence time precipitation.

Sixth, the lubrication system pressure tanks must be properly controlled reasonable flow value and oil-filled tank level, pressure fluctuations play a part of the buffer system and the emergency source of oil supply.

Seven, the oil temperature should be controlled between 40 ± 2 ℃, to ensure the oil viscosity oil.

Eight, the filter must be drained before the filter cylinder trapped air switching tapered roller bearings.

For clearance fit tapered roller bearing ring, it is recommended with a thin layer of top coat anti-motility inhibitors, prevent friction corrosion between the mating surfaces.

Proper installation, FAG bearings for use is very important. I hope we can use the correct installation method in future use